A Pinteresting Nursery: Seating

Hi, I've got another Pinteresting nursery project to show you today, our refinished glider.  Our sweet friend sold us her glider for a great price but warned us that the cushions would need some reupholstering since her son had taken at red Sharpie to them.  To me, it was the perfect opportunity to try out a Pinterest project!! :)

The glider was finished in a natural wood color with cream colored upholstery.  Since all the furniture in the nursery was white, I knew some spray painting was in order.  We took the glider outside on a sunny day, cleaned it with a degreasing agent (don't remember which one), and wiped it down really well.  Then, we primed it with two coats of Zinsser's Cover Stain primer.

After letting it dry for a couple of days, we lightly sanded it down and sprayed it with several light coats of Rustoleum's Ultra Cover Spray in Gloss White.

With the painting complete, I started on the reupholstering process.  I used this and this pin from Pinterest to help me get started.  The sides were really easy to make and were done fairly quickly.  For the bottom cushion, I decided to buy a thicker pad and had to cut it to shape, my kitchen electric knife made that job fairly easy.  Since the bottom pad was thicker, I had to cut the back portion to make it fit.  During the process I completely forgot about the snaps at the back but the cushion is snug enough to stay in place on it's own so I'm not worried.  The gray zebra fabric is the same one I used on the crib bumper.

 

Next, I covered a small pillow using this envelope tutorial.  It was so quick and easy to make, I almost wish I had more pillows to cover!  The butterfly fabric is the same as the curtains.

Finally, I made a double sided blanket using this tutorial.  I actually remembered to wash my fabrics first which was a good thing since both of them shrunk significantly!  The hardest part was how much the fluffy fabric shifted!!  I used tons of pins and safety pins and it still shifted quite a bit.  I also used a quilted fluffy fabric instead of the minky fabric the tutorial recommends, that may have affected it.

 Overall, this was probably the most involved DIY project we did for the nursery.  It did take quite a bit of time and materials, but in the end it was worth it.  The glider fits in with the room perfectly and it's a super comfy place to just sit and relax (hmm, maybe I should move into MY bedroom!!)

Cost Breakdown
Gilder - purchased from friend - $50
Primer - Home Depot - $11.16
Spray Paint - Home Depot - $11.61
Chair Pad Foam - Hobby Lobby (with coupon) - $7.79
Zebra Fabric - JoAnn's (on sale) - $12 (3yd @ $4/yd)
Rectangle PillowForm - Hobby Lobby (with coupon) - $4.79
Butterfly Fabric - Hobby Lobby (on sale) - $2.10 (1/2yd @ $4.20/yd)
Total Cost: $99.45

Have you reupholstered a glider?  Link up your pics in the comments!

A Pinteresting Nursery: Lighting 2.0

Hi peeps, I'm back today with another lighting project I did for the nursery.  This one isn't really a Pinterest inspired project, but there's plenty of inspiration out there for something similar.

{source}

{source}

{source}

I needed a small table lamp for the nightstand and I wanted something cute and ruffly.  After looking everywhere, I couldn't find something that I loved, so I decided to make my own.  I purchased a simple lamp at Wal-Mart and some satin ribbon from Michael's and got to work.  Here's what I came up with:

First, let me tell you, I severely underestimated the amount of time and ribbon this lamp would require.  I purchased two 10 yard spools and though I'd be fine.  Umm, no, it took 5 spools and several episodes of Once Upon A Time before I was done with this project.  Luckily, it was one of the projects I started earlier in my pregnancy and I didn't mind taking the time.

To attach the ribbon onto the lamp shade, I covered the lamp shade with 1" wide Sookwang tape all around. Then I followed Ashley Cannon Newell's video instructions here for the ribbon ruffling.  The ribbon I used is Michael's satin ribbon in Tiffany Blue.  Looking back, there's several things I would do differently if I had it all to do over again.  First, I'd probably paint the lampshade to match the ribbon.  Second, would cover the rim with ribbon for a more finished look.  And third, I would end the ruffles at each row and start a new one instead of working in a spiral.  This left me with a wonky edge at the end that is cleverly hidden towards the wall.

Cost Breakdown:
Lamp - Wal-Mart : $13.00
Ribbon - Michael's (on sale) -  $12.50 (5 rolls @ $2.50 ea)
Total Cost: $25.50


Has anyone out there made anything similar?  I'd love to see it and hear your thoughts!!

Thanks for stopping by!

A Pinteresting Nursery: Lighting

As I mentioned before, I found lots of my inspiration for Maddie's nursery on Pinterest.  One of the ideas I'd seen and loved were the bright colorful chandeliers I'd seen in model rooms and DIY boards.

{source}

{source}

{source}

{source}

Since the room isn't decorated in traditional girly colors, I felt that there needed to be plenty of feminine features in the room.  So, I wandered through several home improvement stores and perused lots of websites in search of the perfect chandelier for the room.  Unfortunately everything was out of my price range and there really wasn't anything that I loved for the room.  I was quite frustrated and about to start looking for alternatives when I had an "aha" moment.  Why not repurpose an old chandelier instead (like the old one we had in our dining room and we got rid of, ugh!!).  So off to Craigslist I went and I found THIS advertisement!  It was exactly what I was looking for!!!  And, even though a prefinished one was out of our price range, it made me realize that what I wanted could be done.  After a bit more perusing through the ads, I found an ad for a brass chandelier that fit my requirements exactly, $20 and an hour later I was on my way to getting this done.

After picking up additional supplies from Lowe's, JoAnn's, and Hobby Lobby, I was in business.  The longest part of the makeover was painting the chandelier.  First we lightly sanded, wiped down, and taped off the lighting fixtures.  Then we started lightly coating it with Valspar's Blue Lagoon spray paint.  Between the chandelier and the medallion, we used 2 cans.  I loved the color, but I wish I'd used Rustoleum spray paint instead.  I found that Valspar's glossy spray stays tacky to the touch and didn't allow for a completely smooth and glossy finish.

Once we let the paint dry thoroughly, then I added all the beads and bling.  I couldn't find aqua beads at any of our local craft stores, so I dyed them instead.  To do this, I placed the beads in a ziplock bag with about 5 drops of Ranger's Alcohol Ink in Sail Boat and then I smushed the beads around in the bag until they were all coated evenly.  I laid them on a dry paper towel to dry and they were ready to use in less than 5 minutes.

To string the beads, I tied nylon beading thread to a small jump ring and alternated large and small beads in clear and aqua.  I used about 28 beads in each size to get the right length for this chandelier.  I tied off a second jump ring to the other end and each section was complete.  To attach them, I used my Crop-A-Dile to punch holes at the top and on each arm of the chandelier and used small pliers to open and insert the jump rings into the holes.

I finished off the dip in each arm with clear oval drop beads using the nylon thread to attach them directly to the chandelier.  And voila, a beautiful custom lighting fixture for less than your average ceiling fan.

Cost breakdown:
Chandelier - $25 on Craigslist (would've been free if I'd thought to keep our old one!)
Medallion - $19.97 at Lowe's
Spray Paint - $7.96 at Lowe's
Beads & Supplies - $22.50 at Hobby Lobby and JoAnn's
Total Cost: $75.43

Thanks for stopping by!

Baby Maddie is on the Way!!!

So, it seems I fell off the face of the earth again :(  but it's been for a very good reason.  Our first baby will be here any day now and we've been working like busy little bees to get not only her nursery, but other areas of the house as well, ready for her arrival.  Add in the fact that we sacrificed my scrapbooking room for her nursery (I know, I know, it's hard making grown up decisions!!) and there's been no time for papercrafting.  I actually bought cards this year for Father's Day, bleh, they were super pricey and SOOO generic.  But all's not lost, my scrappy tools have seen some use in the past few months, it's just all been baby related and I promise to it all to you in the next few weeks.

Since this is our first journey into the world of kids, I quickly turned to the internet, and my BFF Pinterest for ideas and inspiration for all things baby.  And, as usual, Pinterest did not disappoint.  Not only did the majority of my ideas come from there, but the boards were great for corralling all of my purchasing sources.  We were definitely on a budget for our nursery and the majority of the items in this room are either DIY or customized by yours truly and the hubby.

Ready to see some pics?

When we found out we were expecting a girl, all of my previous gender neutral concepts flew out the window.  I knew I wanted a girly space, but I also knew I didn't want to overdose on Pepto Bismol pink.  She has a whole life of pink ahead of her, so we decided to go with non-traditional colors instead.  After looking at inspiration pictures online, in magazines, and on TV, I realized that we were quite drawn to rooms that had aqua or grey in them and we definitely had a strong preference for white furniture.  So, that's how our color scheme came about.  After choosing our colors, the room slowly started to come together in concept as we factored in the items we knew we wanted in the space, such as a dresser with a changing pad instead of a changing table.  Luckily, we started planning out the space since March so there's been plenty of time to wait for sale prices, work on projects a little at a time, and ponder over decisions.  All of this, I think, helped us to create a truly unique space that we love and can grow along with our baby.

There's so many items in our nursery that I would love to expand on and go over with you, but it would be way too much for one post, so I'll be back throughout the next few weeks or so with individual posts on the items we incorporated in our nursery and links to the tutorials and/or inspiration pieces.

Thanks for stopping by!!

For A Little Bookworm

Hi!  I'm back today with a card I made for my nephew, who enjoys reading.

This cute MFT set has been sitting in my stamp collection feeling neglected for far too long.  So I pulled it out and got to stamping.  I stamped out this little cutie using Memento ink and colored him with copics.  The book is paper pieced using some Jillibean cardstock.  His glasses are covered in glaze ink, to mimic the reflection of glass.  After he was finished, I carefully cut him out and attached him to the bookmark base with dimensionals.  The book mark was made by die cutting a layer of patterned paper and cardstock and adhering them together.  I added a little topper and used my crop-a-dile to add the grommet.  I made the holder using kraft cardstock that I die cut using the same pattern to you can see the entire image.  A simple sentiment finishes out the card.

Since the bookmark isn't very snug in the holder, I used a tiny bit of scotch tape to hold it in place just until it arrives safely at its destination.  Once he's enjoyed his card, he can pull it out and use it to hold his place in his books.

Here's a closeup of the colored image:

Thanks for stopping by!

Supplies

Cardstock: hawaiian shores - PTI, kraft - Hobby Lobby

Paper: salt air - Cosmo Cricket, lost & found 2 - MME, numbers on kraft - Jillibean Soup

Stamps: i {heart} books - MFT 

Ink: tuxedo black - Memento

Dies: labels 14 - Spellbinders

Etc: crop-a-dile, glaze pen, grommet, polka dot ribbon

A Manly{ish} Card

I know!!  It's like a record for me, three posts in one week.  I'm working on cutting back on several commitments so I can gain back some more crafty time, I'm really missing it.

So, today I have a manly-ish card to show you.  The -ish is because it has pink in it, and swirls, and pearls.  But I still think it can be considered manly.  Here, take a look:

I made this card for my dad for Valentine's Day.  Yep, I still exchange cards and small gifts with my family.  I'm always up for any holiday that involves presents! :)  So, is it too girly?  Aldo thinks it it.  But what does he know?  There's not a single bow on this one!

I started off with a smokey shadow cardstock base that I double stamped with the largest flourish from my PTI Fancy Flourishes stamp set.  Then I added a doily, that I misted with pink Tattered Angels mist.  Honestly, I didn't expect it to come out so pink, but it is Valentine's Day after all.  Once it dried, I stamped it with the same flourish pattern in black ink.  I die cut several book page layers with MFT's jumbo scallop border die, staggered the layers, and slightly curled them with my fingers for added dimension.  I added a section of pleated black ribbon to hide the seam between the border layers and the doily.  The star was die cut out of more smokey shadow cardstock and stamped with watermark ink using several stamps out of the Grunge Me stamp set.  The sentiment was stamped in black ink.  I couldn't help it and added three back pearls on the top right corner, it needed a little something up there. :)

Well, there you have it, my manly-ish Valentine's Day card.  What to you think?

Supplies

Cardstock: smokey shadow - PTI

Stamps: Fancy Flourishes - PTI, Grunge Me - PTI, Boy Basics: Game On - PTI

Ink: tuxedo black - Memento, Versamark watermark ink, pink Tattered Angels mist

Dies: jumbo scallop border - MFT, star - Spellbinders

Etc: black pearls - Pizzazz Aplenty, paper doily - Hobby Lobby; pleated ribbon

You Make Me Smile

I told you I'd be back. :)  I have another card to share with you today.  This one is for my mom's birthday.  Since I was on a Valentine's day kick, I just stuck with the same color scheme, just because pink makes me happy.

This is also a card I based off of a previous card, you can see the original one here. 

The card base is raspberry fizz cardstock with a sheet of patterned paper from MME's Lost & Found 2 paper pad.  I sponged the edges of the patterned paper with weathered wood Distress ink.  The doily was cut using my Parisian doily die out of smokey shadow cardstock.  I cut two layers of MFT's jumbo scallops out of smokey shadow and raspberry fizz cardstock and then layered them together so that just a tiny amount of smokey shadow peeks out underneath.  The raspberry fizz cardstock is stamped with Polka Dots Basics II in Memento Rosebud ink.  The die cut butterflies were attached to each other with a Maya Road stick pin before I adhered them to the card with a foam dimensional.  To finish it off, I used a sentiment from Verve's Blue Skies stamp set.

Thanks for stopping by!  See you later!

Supplies

Cardstock: raspberry fizz - PTI, smokey shadow - PTI

Paper: Lost & Found 2 - MME

Stamps: Polka Dot Basics II - PTI; Blue Skies - Verve

Dies: parisian doily - PTI; signature series butterfly - PTI

Ink: rosebud - Memento, weathered wood - Distress

Etc: stick pin - Maya Road, satin ribbon - Hobby Lobby

Happy Valentine's Day

Hello, hello, is anybody out there?  My poor blog has been so neglected and abandoned.  But, I'm back today and, hopefully the next several days, with some Valentine's Day cards that I put together this weekend.  I apologize in advance for the terrible lighting in the photos, I took them at work with a borrowed camera.

Today's card is a quick and simple card that I cased out of one of my own creations.  I find that it helps to look back at my own stuff when I've been away from my papercrafting room for a while.  It helps get the creativity flowing again. 

I love the simplicity and clean lines of this layout.  The hearts were die cut out of PTI's true black and raspberry fizz felt and book pages from an old book.  I attached them to the card base using a straight stitch line from my sewing machine.  The sentiment is from Verve's Heart on Fire stamp set and topped of with a single pink rhinestone.  The bottom border was made using PTI's raspberry fizz cardstock and a Fiskar's border punch.  The ink on the paper hearts is Memento's Rosebud.

Thanks for stopping by today, I'll be back with another card later this week.

No Stamp Christmas Cards

I'm back today with a couple of quick and easy Christmas cards that I put together the other night. 

I made large rosette out of some My Mind's Eye paper and sponged the edges with gold pigment ink.  The pearl clusters are from Michaels and the cute Santa sticker is from K & Co.

 

For this card, I used the leftover piece to make a smaller rosette and added some ribbon and bells.

Thanks for stopping by!

Supplies: My Mind's Eye Lost & Found Christmas paper, PTI kraft and ripe avocado cardstock, Recollections pearl clusters, K & Co stickers, blue ribbon, jingle bells, Brilliance galaxy gold ink

A Glittery Tutorial

Hi!  I'm here today with a tutorial on how to make glittered ornaments.  I apologize for the terrible pictures in advance, I didn't realize they were turning out so bad until today! :(  The materials you'll need for this project are clear glass ornaments (not the iridescent type), fine glitter, and Pledge Tile and Vinyl floor cleaner, yup you read that right, lol.  You'll also need something to protect your surface with and a towel to clean up spills.

Step 1:  Carefully remove the top part of the ornament taking care not to crack it.
Step 2:  Squirt a liberal amount of Pledge into the ornament and very lightly swirl it around making sure you coat the entire inside.  Don't shake it, this will cause bubbles that will mess with the finished results.

 Step 3:  Pour the excess fluid back into the bottle and let it drain slightly.  If there are any bubble lightly tap the ornament or pop them with a q-tip.

Step 4:  Fill the ornament about 1/3 of the way with glitter and shake until all the sides are coated.

Step 5:  Pour out the excess glitter, carefully replace the cap back on the ornament and admire your handy work.

That's all there is to it.  Easy peasy, right?  I hope you enjoy making your own glittered ornaments!  If you have any questions, post them in the comments section and I'll try to answer them quickly.

Thanks for stopping by!

Christmas Time

Wow, why does it always seem like Christmas just sneaks up on me?  This year's no different, I'm rushing around trying to get everything done before the 25th, but this year, thanks to Pinterest, I at least had an idea of how I wanted to decorate the house.

I decided to go with bronze, chocolate, and gold this year.  We also bought a new Christmas tree and we went with a slim line tree.  I wasn't sure I was going to like it, but it's just the right size for the front window.  Since there was a huge gap of wall next to the tree, I decided to add a decorated teardrop garland to fill in the space.

For the mantle and throughout the house, I continued the same color pattern and incorporated lots of mercury glass onto the mantle decor.  The mercury glass Christmas tree was my favorite find this year.  I found it at Hobby Lobby and it was the only one I ever saw there.  I'm so glad I picked it up!

I kept the coffee table rather simple and uncluttered since the table is at the same height as my dog's tails and they always seem to knock off whatever's on it.  I used candle sticks to make the candles seem like they're different sizes and filled the tray in with leftover picks and ornaments from my other projects.  It was a quick and simple centerpiece.

Today's Aldo's birthday so I'm rather busy making his birthday dinner but I've got a couple of cards and other Christmas goodies to post later on this week.

Thanks for stopping by!

Courage

Happy Thursday everyone!  I'm back today with a quick and easy one layer card.

I made this card using the Grunge Me and Fancy Flourishes stamp sets from Papertrey Ink.  I stamped each of the images using various brown toned Distress Inks and embellished a few of the images with different colored pearls and rhinestones from Pizzazz Aplenty.  The sentiment, stamped in Rich Cocoa ink, is from Blue Skies by Verve.

Thanks for stopping by!

Silhouette Cameo

My new Silhouette Cameo came in on Thursday and I immediately put it to good use making crafty stuff for the house.  The first thing I made was a vinyl "welcome" sign for my front door.  So, my front door that used to look like this:

Now looks like this today:

I'm so pleased with the way the machine works and the way the sign came out.  If only I could learn how to attach things in a straight line, sigh.  Aldo was very quick to point out how crooked the lettering was, but it really doesn't bother me all that much, yet. :)  I have a feeling I'll be using this machine a whole lot more than my Cricut.  While my Cricut sat unused on a shelf, this new Cameo is sitting right on my desk within easy reach and readily attached to my computer.

I painted the front door last Saturday using some left over paint from another project.  I was expecting it to be a more burgundy red, but was pleasantly surprised by the pretty, deep orange it reflects in the sun.  I think it works with the brick.  Now the only think left to do is paint the wood trim white and add some Thanksgiving decor to our tiny entryway.

I have a couple of cards that I made this week, I'll try to take pictures and post them later on in the week.

Have a great weekend!!

Miss You A Latte

Happy Tuesday everyone!!  I have a card to share with ya'll today :)  I made it this weekend for MFT's weekly sketch.

I finally broke down and ordered MFT's Miss You A Latte stamp set.  It's been on my wish list since it came out, but I wasn't sure I'd use it much.  I broke out my new My Mind's Eye paper pads, some silk ribbon that's been on my desk for a while and dusted off my sadly neglected copics.

I'd meant to post this on Saturday but there was a pet emergency in our house.  Let's just say that I didn't know that such a tiny cut on a dog's ear could bleed so much!!  Every time we thought it was slowing down, Snicks would shake his head and splatter blood EVERYWHERE!!  It was such a mess!  We finally got his ear bandaged up and we have now determined what our next home improvement project will be: repainting the bathroom.  Poor puppy, luckily, he's doing much better now. :)

Thanks for stopping by!! 

Supplies for Sale

Happy Tuesday everyone!!  I have updated my Sale page at the top with new stamps from MFT and Prickley Pear.  Be sure to check it out!